Tips and Pitfalls: IVR
If you use RDI, persistent domains must be added to fcdomain allowed list
Load balancing of IVR NAT traffic across equal cost paths from an IVR-enabled switch is not supported. However, load balancing of IVR NAT traffic over PortChannel links is supported.
You cannot configure IVR NAT and preferred Fibre Channel routes on Generation 1 module interfaces.
In a configuration involving IVR without NAT, if one VSAN in the IVR topology is configured with static domain IDs, then the other VSANs (edge or transit) in the topology must be configured with static domain IDs.
Recent Posts
See AllOne issue to be mindful of when configuring Cisco MDS switches with Brocade switches is that Brocades Per VC Flow Control must be...
At 1Gbps a FC frame is 4km long, at 2Gbps a frame is 2km long, and at 4Gbps a frame is 1km long. A 10km cable is 20km round trip. Round...
Comments